Bumper- Front

• Ultra Light Weight Hybrid Bumper w/Tube And Plate Steel
• Sleek Aerodynamic Design
• Provides Optimal Tire Clearance
• Retains Factory Skid Plate
• Retains Adaptive Cruise Control And Park Assist
• Center Cutout For Rigid Industries 20 in. LED Light Bar
• The Fit Of The Bumper Is High And Tight
• Perfectly Follows The Vehicles Body Lines

See All

• Ambush Series Front Bumper

See All

• Intercooler Shroud For Diesel Engines Only
• Easy Bolt On Installation
• Protects From Debris
• Two-Stage Light Texture Finished In Black

See All

• The Best Ground Clearance / Tire Clearance / Approach Angle
• Angled Facets To Improve Its Ability To Slide Over The Rocks
• Features Integrated Winch Mount And One-Piece Design
• Specifically Engineered Recovery Shackle Tabs

See All

• The Best Ground Clearance / Tire Clearance / Approach Angle
• Angled Facets To Improve Its Ability To Slide Over The Rocks
• Features Integrated Winch Mount And One-Piece Design
• Specifically Engineered Recovery Shackle Tabs
• Brawler Bar Features Trail Protection And Lower Profile
• Fits Into Garages / Trailers / etc.

See All

• The Best Ground Clearance / Tire Clearance / Approach Angle
• Angled Facets To Improve Its Ability To Slide Over The Rocks
• Features Integrated Winch Mount And One-Piece Design
• Specifically Engineered Recovery Shackle Tabs
• Comp Stinger Prevents Forward-Roll / Protects The Radiator Area

See All

• The Best Ground Clearance / Tire Clearance / Approach Angle
• Angled Facets To Improve Its Ability To Slide Over The Rocks
• Features Integrated Winch Mount And One-Piece Design
• Specifically Engineered Recovery Shackle Tabs
• Trail Stinger Provides Clean Lines / Forward-Flop Protection

See All

• The Best Ground Clearance / Tire Clearance / Approach Angle
• Angled Facets To Improve Its Ability To Slide Over The Rocks
• Features DOM Tube / Gusseted Brawler Bar
• Features Integrated Winch Mount / OEM Lights Mounting Provisions
• The Brawler Bar Features Trail Protection / Lower profile
• Fits Into Garages / Trailers / etc.
• Specifically Engineered Recovery Shackle Tabs
• The Recessed Fog Lamp Easily Accept Your Stock Fog Lamps
• Strong Foundation For Recovery Equipment
• SpyderShell Coating

See All

• The Best Ground Clearance / Tire Clearance / Approach Angle
• Angled Facets To Improve Its Ability To Slide Over The Rocks
• Features DOM Tube / Plate Steel Gussets
• Features Integrated Winch Mount / OEM Lights Mounting Provisions
• Trail Stinger Provides Clean Lines / Forward-Flop Protection
• Specifically Engineered Recovery Shackle Tabs
• The Recessed Fog Lamp Easily Accept Your Stock Fog Lamps
• Strong Foundation For Recovery Equipment
• SpyderShell Coating

See All

• Full Replacement Bumper With Full Grill Guard
• Gloss Black Powder Coat
• Bolt-on Tow Hooks Included
• Light Mounts For Factory Fog Lights
• Optional Bolt-on Winch Mount
• Optional Bolt-on 1in. D-ring Mounts
• MADE IN THE USA

See All

• Full Replacement Bumper With Full Grill Guard
• Gloss Black Powder Coat
• Bolt-on Tow Hooks Included
• Light Mounts For Factory Fog Lights
• Optional Bolt-on Winch Mount
• Optional Bolt-on 1in. D-ring Mounts
• MADE IN THE USA

See All

• Full Replacement Bumper With Full Grill Guard
• Gloss Black Powder Coat
• Bolt-on Tow Hooks Included
• Light Mounts For Factory Fog Lights
• Optional Bolt-on Winch Mount
• Optional Bolt-on 1in. D-ring Mounts
• MADE IN THE USA

See All

• Full Replacement Bumper With Full Grill Guard
• Gloss Black Powder Coat
• Bolt-on Tow Hooks Included
• Light Mounts For Factory Fog Lights
• Optional Bolt-on Winch Mount
• Optional Bolt-on 1in. D-ring Mounts
• Optional Bolt-on 2in. Receiver
• MADE IN THE USA

See All

• Provides The Highest Ground And Tire Clearance Possible
• Low Profile / High Clearance Design
• Full Width
• Easy Installation
• Low-Profile Stinger Brawler Bar Design
• Recovery Shackle Tabs

See All

• Mid-Width / High Clearance Bumper
• Protects The Lower Corner Of The Grille
• Can Be Mounted Without Cutting / Altering The Frame Rails
• Faceted Design Provides Best Ground Clearance / Approach Angle
• Features Recessed Buckets To Mount The Factory Fog Lamps
• Features Conveniently Placed Loom Mounting Holes
• Any Winch w/Standard 10 in. X 4.5 in. Mounting Pattern Will Bolt

See All

• Grille-Width / High Clearance Bumper
• Brawler Bar Provides Protection To Winch / Grille / Radiator Area
• Can Be Mounted Without Cutting / Altering The Frame Rails
• Faceted Design Provides Best Ground Clearance / Approach Angle
• Recessed Fog Lamp Mounts
• Winch Compatibility

See All

• Grille-Width / High Clearance Bumper
• Trail Stinger
• Can Be Mounted Without Cutting / Altering The Frame Rails
• Faceted Design Provides Best Ground Clearance / Approach Angle
• Recessed Fog Lamp Mounts
• Winch Compatibility
• Recovery Shackle Tabs

See All

• Compact Multi-Faceted Design Protects Lower Grille
• Recessed Winch Mount
• Brawler Bar Made Of Dom Tubing w/Tube Gussets
• SpyderShell™ Armor Coat Semi-Gloss Black Finish
• Recessed Light Mounts Accept LED Cube Lights
• 5 Year Warranty

See All

• Mid-Width / High Clearance Bumper
• Provides Protection For The Grille Corners / Fenders
• Brawler Bar
• Can Be Mounted Without Cutting / Altering The Frame Rails
• Faceted Design Provides Best Ground Clearance / Approach Angle
• Recessed Fog Lamp Mounts
• Winch Compatibility
• Recovery Shackle Tabs

See All

• Bruiser Front Bumper

See All

• Mid-Width Multi-Faceted Design Protects Lower Grille
• Recessed Winch Mount
• Brawler Bar Made Of Dom Tubing w/Tube Gussets
• SpyderShell™ Armor Coat Semi-Gloss Black Finish
• Recessed Light Mounts Accept LED Cube Lights
• 5 Year Warranty

See All

• High Clearance Design Tucks Up Tight To Provide Extreme Approach Angle And Clearance On Tight Trails
• Stubby Width Gives Tires Full Access To Grip The Terrain And Pull The Jeep Up And Over Obstacles
• Recessed Winch Mount With Integrated Fairlead Plate Provides A Low Center Of Gravity And Unrestricted Airflow
• Fits Up To 12000Lb Winch
• Beefy Top-Mounted Recovery Tabs Stay Out Of The Way When Wheeling But Ready To Use When Needed
• 4 mm Thick Steel Plate Construction CNC Laser Cut And Precision Brake-Formed

See All

• Classic Bumper Design Offer A Modern Twist To A Classic Design
• Manufactured From Durable 5/32 Steel And 2X.120 Tubing
• D-Ring Mounts Welded Inside And Out For Increased Strength
• D-Rings Included - 4.75 Ton Capacity
• Comes In Satin Black Finish Black Finish

See All

• Includes A Steel Skid Plate With Side Gussets
• Low-Profile Fitment With Improved Approach Angle
• Lightweight Design Providing Ample Protection
• Tube And Plate Steel Construction
• Micro-Texture Black Powder Coat Finish
• Mount for 20 In. Dual Row LED Light Bar
• Mounts for [2] 3 In. LED Pod Lights
• Integrated Front Parking Sensor Mounts

See All

• Compatible w/Poison Spyder Frame Mounted Tire Carrier
• Multi-Faceted High Clearance Design
• Integrated Class III Tow Hitch
• SpyderShell™ Armor Coat Semi-Gloss Black Finish
• Recessed Mounts For LED Cube Lights

See All

• Extra Protection For The Grille And Tires
• Provide A Custom Look And Add Strength To Bumper Assembly
• Spydershell Armor Coat Finish Carries A 5 Year Limited Warranty

See All

• Combine Hard Core Off Road Performance With Full Features
• Provide A Custom Look And Add Strength To Bumper Assembly
• Spydershell Armor Coat Finish Carries A 5 Year Limited Warranty

See All

• Two Piece Construction
• Tubular w/Sheet Metal Design
• Step Corners For Easy Bed Access
• Tail Corners Keep OE Vehicle Lines

See All

• 1/8 in. Thick Steel Plate
• ADD Aggressive Style w/o Weighing Down The Vehicle
• Bolt On Installation
• Non-Winch Capable
• OE Sensor Compatible
• Includes License Plate Bracket
• Light Fitment 20 in. Dual Row LED Middle/4 Cube LEDs

See All

• 1/8 in. Steel Plate With 1/4 in. Winch Plate For Strength
• 12000 lb. Winch Capacity
• OE Sensor Compatible
• Includes License Plate Bracket
• Light Fitment 30 in. Dual Row LED Middle And 4 Cube LEDs

See All

• Full Replacement Bumper With Full Grill Guard
• Flat Black Powder Coat
• Bolt-on Tow Hooks Included
• Light Mounts For Factory Fog Lights
• Optional Bolt-on Winch Mount
• Optional Bolt-on 1in. D-ring Mounts
• Optional Bolt-on 2in. Receiver
• MADE IN THE USA

See All

• ELITE Front Guard Plate

See All

• Full Replacement Bumper w/Full Grill Guard
• Flat Black Powder Coat
• Bolt-on Tow Hooks Included
• Light Mounts For Factory Fog Lights
• Optional Bolt-on Winch Mount
• Optional Bolt-On 1 in. D-Ring Mounts
• Optional Bolt-On 2 in. Receiver
• MADE IN THE USA

See All

• 3/16 in. Steel Plate Construction
• Bolt On Design For All Body Armor JL Front Bumpers
• 20 in. Single Row Light Opening
• Two-Stage Light Texture Finish In Black

See All

• FMJ Full Width Winch Bumper

See All

• FMJ Stubby Winch Bumper

See All

• Integrated Winch Plate
• Single 2 Hoop With Two Light Tabs
• Skid Plate For Steering Box
• Reinforced Bumper Wings For Added Strength
• Dual Shackle Plates For D-Rings
• Fits TJ And YJ All Models
• Dual Process Black Textured Powder Coat

See All

• Lights Not Included
• 1/4 in. And 3/16 in. Steel Construction
• 2 Stage Powder Coat Finish
• Accommodates Up To A 12500 lbs Winch
• DV8 No Hassle Warranty

See All

• Front Bumper

See All

• High Clearance Design
• Integrated Winch Plate
• 2 in.. Dia. Center Hoop With Light Tabs
• Dual Shackle Plates For D-Rings
• Dual Process Black Powder Coat Finish
• Light Mounting Holes On Bumper Wings

See All

• Manufactured From Durable 5/32 Steel
• Protects Vehicle From On And Off-Road Debris
• High Strength D-Ring Mounts Welded Both Inside And Out
• D-Rings Included - 4.75 Ton Capacity
• Built In Winch Plate Will Mount Up To 12000Lbs Winch
• Led Lights Included
• Comes In Satin Black Finish

See All

• Front Winch Bumper

See All

• Optional Full-Width Wings FBBR-02W
• Adjustable Bull Bar Light Tabs
• 2-Stage Micro-Texture Powder Coat
• 3.5 mm Body And 5 mm Mounts/Supports
• Winch Ready
• Reinforced D-Ring Mounts
• Compatible With Factory Plastic And Metal Skid Plates
• Works With Factory Parking Sensors

See All

• Full Width Bumper
• Provides Greater Tire Clearance
• Winch Ready-Accepts Warn Zeon Winches
• Integrated D-Ring Mounts That Hold Up To 7/8 Shackle
• Side Vents And Large Mesh Insert For Optimal Air Flow
• Accommodates Most 20 Light Bar With Optional Insert

See All

• Stubby Bumper
• Provides Maximum Tire Clearance
• Winch Ready-Accepts Warn Zeon Winches
• Integrated D-Ring Mounts That Hold Up To 7/8 Shackle
• Side Vents And Large Mesh Insert For Optimal Air Flow
• Accommodates Most 20 Light Bar With Optional Insert

See All

• Provides Greater Tire Clearance
• Fully Customizable w/A 14 Piece Modular Design
• Strategically Placed Cutouts For Maximum Airflow
• Mounting Options For 2x2 in. Dually Lights To Max. Light Coverage
• Engineered To Work With Up To A 12000 lbs. Warn Zeon Winch
• 3/16 in. Steel Winch Tray
• MADE IN THE USA

See All

• Revolutionary Combination Of Both Grille And Winch Bumper
• Provides Greater Tire Clearance
• Strategically Placed Cutouts For Maximum Airflow
• Engineered To Work With Up To A 12000 Lbs Warn Zeon Winch
• Complete Bolt On Installation w/Stainless Steel Hardware
• MADE IN THE USA

See All

• Aggressive Design And Unique Styling
• Combines Both Grill And Bumper
• Side Mounting Slots And Tabs For Light Options
• Lower Cutout For Increased Airflow
• Provides Far More Tire Clearance

See All

• Removable Insert For Customization Options
• Aggressive Design

See All

• Guardian Front Bumper

See All

• Bumper Is Designed Ultra Narrow
• Provide Maximum Tire Clearance
• Tapered Knife Edge Design
• Welded Inside And Out For Superior Strength
• Winch Ready Including WARN Power Plant

See All

• X-treme-Built Front Bumpers
• 2X5X0.190 in. Wall Enclosed Rectangular Tube
• Use With Body Armor Winch Plate
• Manufactured In 54 in. Length
• 4-Mil Black Powder Coat Finish
• Shackle Mounts Welded Front And Rear Surfaces
• Steering Box Slid Plate And Light Tabs
• 2 in. Recovery Receiver Package/No Drill-Bolt

See All

• Manufactured From Durable 5/32 Steel
• Protects Vehicle From On And Off-Road Debris
• High Strength D-Ring Mounts Welded Both Inside And Out
• D-Rings Included - 4.75 Ton Capacity
• Built In Winch Plate Will Mount Up To 12000Lbs Winch
• Comes In Satin Black Finish Black Finish
• Includes High Powered Led

See All

• Winch Ready
• Integrated D-Ring Mounts And Tow Hooks
• Fab Fours Signature Injection Molded Light Housings
• 90mm Fog And 60mm Turn Indicator Lights Are Included
• Winch Delete Tray Included

See All

• Enhances the look while remaining lightweight
• 1in. D-Ring Mounts
• HELLA 90mm Fogs And 60mm Turns Included
• Signature Light Housings
• 9.5 Winch Ready
• Mounting Brackets And Hardware Included
• Lifetime Warranty On Structure
• 1 3/4in. OD Tube Grill Guard

See All

• Winch Ready-Accepts Up To 12000 lbs. Warn Zeon Winch
• 3/16 in. Steel Construction
• 140 lbs.
• Mounting Options For 2x2 in. Cube Lights To Maximum Led Coverage
• Front Bumper w/Provided Brackets That Tie Directly To The Frame
• MADE IN THE USA

See All

• Optional Bull Bar
• 3 in. Pod Light Mounts
• 2-Stage Micro-Texture Powder Coat
• 4 mm Body And 5Mm Mounts/Supports
• In-Bumper Winch Mount
• Reinforced D-Ring Mounts
• Compatible With Factory Plastic And Metal Skid Plates
• Works With Factory Parking Sensors
• Paintable Aluminum Mesh Panels
• 3 Piece Construction

See All

• High Clearance Design For An Ultimate Approach Angle
• Hidden Winch Mount For Many Sized Winches
• Retains ACC And Parking Sensors
• Armor The Protects The Lower Intercooler
• Internal Zip Tie Tabs For Wire Management
• Compatible With Stock Skid Plates Including TRD
• Paintable Aluminum Accent Panels

See All

• 20 in. Dual Row Light Bar Mount
• 3 in. Pod Light Mounts
• 3-Piece Design
• 2-Stage Micro-Texture Powder Coat
• 4mm Body And 5Mm Mounts/Supports
• Reinforced D-Ring Mounts
• Compatible With Factory Plastic And Metal Skid Plates
• 3 Piece Construction
• Does Not Interfere With 360 Grades Camera

See All

• Open Fender Front Bumper

See All

• Included Winch Plate
• Accommodates Factory 4-Hole Mounted Fog Lights
• Can Mount Up To A 13 in. Light Bar Above Or Below Bull Bar
• Pocketed Clevis Mounts For 3/4 in. D-Rings
• Bolt-On Installation-No Cutting Required

See All

• Black Powder Coated
• 1/4in. And 3/16in. Steel Construction
• Winch Mount For The WARN 16.5 Or Smaller
• 1in. D-Ring Mounts
• Mounting Brackets And Hardware Included
• HELLA 90mm Fog Lights And 60mm Turns Included
• Fully Welded Inside And Out
• Lifetime Warranty On Structure

See All

• 1/4in. And 3/16in. Steel Construction
• Winch Mount For The WARN 16.5 Or Smaller
• 1in. D-Ring Mounts
• Mounting Brackets And Hardware Included
• Fab Four 90mm Fog Lights And 60mm Turns Included
• Fully Welded Inside And Out
• Lifetime Warranty On Structure

See All

• Front Winch Bumper

See All

• Manufactured From Durable 5/32 Steel And 2X.120 Tubing
• Fits Oe Fog Light Housing
• Built In Winch Plate Will Mount Up To 12000Lbs Winch
• Comes In Satin Black Finish

See All

• Manufactured From Durable 5/32 Steel And 2X.120 Tubing
• D-Ring Mounts Welded Inside And Out For Increased Strength
• D-Rings Included - 4.75 Ton Capacity
• Built In Winch Plate Will Mount Up To 12000Lbs Winch

See All

• Manufactured From Cold Formed Steel
• Come In Charcoal Gray Finish
• Easy Installation

See All

• Aggressive Design
• Winch Ready- Will Hold Up To 16.5K Winch (Depends On Vehicle)
• Perfectly Follows The Body Lines
• Side Mounting Slots And Tabs For Various Light Options
• Provides Far More Tire Clearance
• Integrated Shackle Mounts

See All

• Low Profile / High Clearance Design
• The Ends Of The Bumper Protect The Lower Corner Of The Grille
• Faceted Design Provides Best Ground Clearance / Approach Angle
• Recovery Shackle Tabs

See All

• Low Profile / High Clearance Design
• The Ends Of The Bumper Protect The Lower Corner Of The Grille
• Faceted Design Provides Best Ground Clearance / Approach Angle
• Brawler Bar
• Recovery Shackle Tabs

See All

• Winch Ready
• Integrated D-Rings And Tow Hooks

See All

• Stubby Design For Maximum Tire Clearance
• Winch Ready
• Integrated Shackle Mounts
• Integrated 10 in. Dual Row Light Bar Mount
• Simple And Quick Installation

See All

• 2 in. Steel Tube Construction
• Bolt On Design For All Body Armor JL Front Bumpers
• Welded Adjustable Light Mount
• Two-Stage Light Texture Finish In Black

See All

• Light Weight
• Steel Construction
• Integrated 20 in. Light Bar Housing
• Mounting Options For Two 2 in. LED
• Lower Cut Offs For Better Air Flow
• Fits High And Tight

See All

• Winch Ready For The WARN Zeon 10
• Center Mount For Integrated 30 in. Light Bar
• Mounting Options On Each Side For Three 3X3 LED Cube Lights
• Integrated D-Ring Mounts Provides Far Greater Tire Clearance
• Made From 3/16 in. Steel Construction
• 2 Stage Matte Black Powder Coat With Epoxy Primer
• MADE IN THE USA

See All